Annual Furnace Service

Furnace Tune-Up in Murrieta β€” Annual Safety Inspection & Maintenance

Last Updated: June 2026

A one-hour furnace tune-up before the first cold snap catches worn igniters, dirty burners, and safety issues before they become a no-heat call in December.

Pre-Season Scheduling
Safety Inspection Included
Upfront Pricing
Easy Online Scheduling
Gardner HVAC technician inspecting furnace burner assembly during annual maintenance service in Murrieta Inland Empire
Annual Furnace Service
Murrieta & Inland Empire
Schedule before the first Inland Empire cold snap
(951) 246-4337
Don't wait until your heat stops working
What's Included

What's Included in a Furnace Tune-Up Service

A furnace tune-up is a single-visit annual service for your furnace β€” not a service contract, not a subscription. You schedule it once a year, we inspect and service your heating system, and you're done. Inland Empire homeowners who get a tune-up every fall avoid the most common no-heat calls. View all furnace and heating services.

Safety Inspection

We inspect the heat exchanger for cracks, test CO output with a combustion analyzer, and verify all safety switches and limits are functioning.

  • Heat Exchanger Inspection
  • Carbon Monoxide Testing
  • High-Limit Switch Test
  • Pressure Switch Check

Burner Cleaning & Adjustment

Dirty or misaligned burners reduce efficiency and increase CO risk. We clean each burner port, check flame pattern, and adjust gas pressure to spec.

  • Burner Port Cleaning
  • Flame Pattern Inspection
  • Gas Pressure Verification
  • Manifold Pressure Check

Igniter & Electrical Check

Hot surface igniters wear down each season. We test amp draw, clean the flame sensor, and replace worn igniters before they fail mid-winter.

  • Igniter Amp Draw Test
  • Flame Sensor Cleaning
  • Control Board Inspection
  • Thermostat Calibration Check

Airflow & Filter Review

Restricted airflow is the leading cause of furnace short-cycling and heat exchanger overheating. We check the filter, measure static pressure, and inspect duct transitions.

  • Filter Condition Check
  • Static Pressure Measurement
  • Blower Motor Inspection
  • Supply & Return Airflow Test

What Changes After an Annual Furnace Tune-Up

Burners cleaned β€” proper blue flame pattern restored
Flame sensor cleaned β€” reliable ignition on every call
Heat exchanger inspected β€” CO risk ruled out
Gas pressure verified at manufacturer specification
Blower motor lubricated and amp draw within spec
Filter checked β€” airflow confirmed through all registers
Before and after furnace maintenance showing dusty burner assembly cleaned during Gardner HVAC tune-up service in the Inland Empire
BEFORE
AFTER
Gardner Plumbing Co. HVAC technician and service van ready for furnace tune-up service
800+
Furnace Tune-Ups Completed
Why Choose Our HVAC Team

Why Inland Empire Homeowners Choose Us for Furnace Tune-Ups

Gardner Plumbing Co. is a licensed HVAC contractor serving Murrieta, Temecula, Menifee, and the greater Inland Empire (CA Contractor's License {{CSLB_C20_LICENSE_TBD}}). Our HVAC team has performed over 800 furnace tune-ups across Riverside County. If the inspection uncovers a problem, we quote the repair on the spot β€” no second trip. Want furnace and AC service bundled under one annual agreement? Our HVAC maintenance plan covers both systems.

Pre-Season Availability

Schedule in September or October and get ahead of the November rush. We hold pre-season tune-up slots specifically for this window.

CO Safety Inspection Included

Every tune-up includes a combustion analysis and CO output test β€” not an add-on. A cracked heat exchanger is found before it becomes a family safety issue.

Upfront Tune-Up Pricing

Flat-rate tune-up pricing, quoted before we arrive. If a repair is needed, you receive a written quote before we proceed β€” no surprises.

30+ Years in the Field

Thirty years of serving Riverside County homes means our technicians recognize the failure patterns IE furnaces develop β€” and catch them early.

Service Areas

Serving Murrieta, Temecula, and All of Riverside County

Annual furnace tune-up service is available across the Inland Empire, with pre-season scheduling from our Murrieta base. We cover Temecula, Menifee, Perris, Canyon Lake, Lake Elsinore, Corona, Moreno Valley, Riverside, and Hemet β€” throughout Riverside County.

Don't See Your Area?

We serve additional areas throughout Riverside County. Call to confirm service availability.

FAQ

Furnace Maintenance Questions and Answers

Find answers to common questions about furnace tune-ups in Murrieta and the Inland Empire.

Questions & Answers

Have More Questions?

Can't find what you're looking for? Our HVAC technicians are standing by to answer your questions and schedule your furnace tune-up. Need immediate help? Call (951) 246-4337.

Schedule Now

When Pre-Season Maintenance Becomes Urgent

A furnace tune-up is preventive β€” scheduled when it's convenient, not when it's critical. But if your furnace hasn't been serviced in two or more years and you're heading into November, urgency increases. A system that hasn't been inspected in multiple seasons is a no-heat call waiting to happen. Schedule now before slots fill.

Situations Where Scheduling Becomes Urgent:

Furnace not serviced in 2+ years
First cold snap hitting β€” furnace hasn't been tested
Yellow or irregular burner flame noticed
CO detector triggered near furnace area
Furnace short-cycling or shutting off early
Burning smell on first startup of the season
No heat despite thermostat calling
Older furnace β€” haven't confirmed heat exchanger integrity
Gardner HVAC technician arriving for furnace maintenance service in Murrieta
Pre-Season
Slots Fill Fast

Schedule Your Furnace Tune-Up Before Winter

Annual furnace maintenance across Murrieta, Temecula, and the Inland Empire. Flat-rate pricing, licensed technicians, combustion safety inspection included. Schedule now β€” pre-season slots fill fast in October.

Pre-Season Availability
Licensed & Insured
4.9 Star Rating